Corrosion-resistant sorting for salt and minerals.
Developed for sorting dry and wet products between 120 mesh and 10 mm. The 316L food-grade stainless body runs without interruption in highly corrosive environments.
A wide range of industries.
From raw salt to refined table salt, from Himalayan rock salt to sweeteners and food additive powders, stone, soil, plastic, metal and colour defects are removed across a wide product group.
Raw Salt (2–10 mm)
Removal of stone, soil, clay and foreign material in rock and sea-sourced raw salt.
Granular Salt (8–16 mesh)
Detection of black spots, shell residue and discolouration in coarse granular salt.
Salt (16–40 mesh)
Higher whiteness in medium-grain salt through micro foreign material and grey grain separation.
Fine Salt (40–70 mesh)
Precise defect and particle removal in refined table salt, even in powder form.
Himalayan Pink Salt
Shade classification and separation of dark grains and rock residue.
Sweeteners & Food Additives
Black spot, fibre and foreign material control in crystalline sweeteners, konjac flour and powdered additives.
Corrosion-resistant salt sorting.
An AI algorithm trained specifically for salt detects defects in transparent and semi-transparent grains along with stone, soil and foreign material residue, at high accuracy.
A body built entirely from 316L food-grade stainless steel gives long, stable operation in salty and humid production environments. Wet salt feeding, a precise channel design and a high-pressure ejector group reach capacities up to 16 tonnes per hour on 2–10 mm raw salt.
Why SNT-T?
Salt-Specific AI Algorithm
A deep learning model trained specifically for salt and mineral grains catches defects in transparent and semi-transparent grains that conventional colour sorting cannot see.
316L Food-Grade Body
A body entirely of 316L stainless steel runs for years in highly corrosive salt environments without rust or deformation .
Dry and Wet Product Capability
Dry or moist products between 120 mesh and 10 mm can be sorted directly, with no drying line required .
High Capacity
A single machine handles 8–16 t/h on raw salt and 2–8 t/h on granular salt; high tonnage on one line means lower unit cost.
Low Reject Ratio
1 : 30 reject ratio and precise ejector triggering keep product loss to a minimum.
Industry 4.0 Control Panel
Product recipe storage, sensitivity adjustment and live production statistics give full control.
Model comparison.
Scroll the table horizontally to see every column.
| SPECIFICATION | SNT-T8 | NOTE |
|---|---|---|
| PERFORMANCE | ||
| Grain Size | 120 mesh – 10 mm | Dry and wet product |
| Capacity — Salt | 2–8 t/h | 16–120 mesh |
| Capacity — Raw Salt | 8–16 t/h | 2–10 mm |
| Sorting Accuracy | 99% | Standard configuration |
| Reject Ratio (Defect : Good) | 1 : 30 | Minimum product loss |
| POWER & AIR | ||
| Voltage / Frequency | 220 VAC / 50–60 Hz | Single-phase supply |
| Power | ≤ 3.6 kW | Compressor excluded |
| Air Pressure | 0.6–0.8 MPa | 6–8 bar |
| Air Consumption | 8.2 m³/dk | Dry, oil-free air |
| MECHANICAL | ||
| Body Material | 316L Stainless Steel | Food grade |
| Dimensions L×W×H | 3506 × 2452 × 2203 mm | Feed hopper included |
| Weight | 2,600 kg | Net |
Capacity values vary with product type, moisture content and input quality. Specifications may change without notice.
SNT-T8 for your salt line
Tell us your product, your capacity and your current line width, and one of our engineers will call you within 24 hours on weekdays. Send a sample if you like, and we will test the machine on your own product.
Yukarı Dudullu, Ümraniye / İstanbul, Türkiye
Your request has been received.
Our engineer will call you within 24 hours.